Acceptance of Components while Recognizing CB Report of End Products
1. Component with CB Test Certificate
— If there is no technical difference between IEC and GB standards, component will be accepted without further evaluation.
— If there is evident technical difference between IEC and GB standards and not covered by the CB report, component will be accepted after additional satisfactory evaluation to address the national differences.
— If the IEC standard on which the CB report is based has no corresponding GB standard, component will be accepted without further evaluation.
2. Component provided with a national certificate
The certificate shall indicate detailed information such as component specifications and applicable standards, and that the component has been tested and found in compliance with relevant IEC standards or harmonized standards. Content of the certificate will be checked and verified.
— If there is no technical difference between the certification standard and corresponding GB standard, component will be accepted without further evaluation.
— If there is evident technical difference between the certification standard and corresponding GB standard, component will be accepted after additional satisfactory evaluation to address the national differences.
3. Component without individual certification
— If there is no existing applicable IEC or GB component standard, and the component is tested to component requirements in end product standard and recorded in the CB test report, it will be accepted without further evaluation.
— If there is existing applicable IEC and GB component standard, but the component is only tested to component requirements in the end product, component test report should be attached to end product report or test data provided in end product test report. When necessary, verification tests according to applicable component standard may be conducted before component can be accepted.
Exporting to China?
Go Global Compliance Inc. has seamless solutions for your radio (SRRC), telecom (NAL) and safety/emc (CCC) certification needs:
Go Global Compliance Inc.
Tel (US): (408) 416-3772
Fax (US): (408) 416-3224
peter@goglobalcompliance.com
Skype: petermerguerian
twitter: marketaccess
No comments:
Post a Comment