Australia and C-Tick

Anyone interested to know Australian regulations and the C-Tick Mark?


Regulator: ACMA http://www.acma.gov.au/

Wireless Frequencies, Power Levels, Application and Standards:

915-928
1 W (EIRP): FH with a minimum of 20 ch
1 W (EIRP): digital modulation
Power spectral density: 25 mW/ 3kHz
6 dB bandwidth: at least 500 kHz
AS/NZS 4771

2400-2483.5
500 mW (EIRP): FH with a minimum of 15 ch
4 W (EIRP): FH with a minimum of 75 ch
4 W (EIRP): digital modulation
Power spectral density: 25 mW/ 3kHz
6 dB bandwidth: at least 500 kHz
AS/NZS 4771
ETS 300 328

5150-5250
200 mW (average over the entire transmission burst)
AS/NZS 4771
RLAN transmitters used indoors
If the emission bandwidth is 1 MHz or greater, the radiated power spectral density in any 1 MHz is limited to 10 mW per MHz.
If the emission bandwidth is less than 1 MHz, the radiated power spectral density in any 4 kHz is limited to 40 uV per 4 kHz.

5250-5350
200 mW (average over the entire transmission burst)
AS/NZS 4771
RLAN transmitters used indoors
If the emission bandwidth is 1 MHz or greater, the spectral density in any 1 MHz is limited to 10 mW (EIRP) per MHz.
If the emission bandwidth is less than 1 MHz, the spectral density in any 4 kHz is limited to 40 uV (EIRP) per 4 kHz.

5725-5850
4 W (EIRP): FH with a minimum of 75 ch
4 W (EIRP): digital modulation
Power spectral density: 25 mW/ 3kHz
6 dB bandwidth: at least 500 kHz
AS/NZS 4771



PETER S. MERGUERIAN
peter@goglobalcompliance.com
GO GLOBAL COMPLIANCE, INC.
Tel: (408) 416-3772
Fax: (408) 416-3224
Cell: (925) 487-4640
Skype: petermerguerian
twitter: marketaccess