USA: California Office of Environmental Health Hazard Assessment (OEHHA)

The California Safe Drinking Water and Toxic Enforcement Act of 1986 (also known as Proposition 65 or Prop 65) requires the governor (through the State's Office of Environmental Health Hazard Assessment, or OEHHA) to publish, at least annually, a list of chemicals known to the State of California to cause cancer or reproductive toxicity. 

The OEHHA website can be viewed in the below link

http://oehha.ca.gov/prop65.html/

Customs Union (Belarus, Kazakhstan and Russia) Certificate

Dear All,

Go Global Compliance is happy to announce that we are able to process Customs Union Certs (EAC Mark) valid for entry into Belarus, Kazakhstan and Russia with a validity of 5 years. Average lead time currently 3-4 weeks

Checklist:

- Complete CB Report and Certificate
- EU EMC Reports
- English User Manual with Russian safety instructions
- CIG023 factory(ies) inspection report(s)
- HS Code

For a full list of services and country certifications and webinars, please visit us at www.goglobalcompliance.com

Peter Merguerian
peter@goglobalcompliance.com
(408) 931-3303

Thailand - Labeling for Products Classified under SDoC

For products classified under the Supplier Declaration of Conformity (SDoC), there is no labeling requirement but the following compliance wording shall be shown on package, user manual, or leaflet distributed together with the equipment.

“This telecommunication equipment conforms to NTC technical requirement”

For questions or clarrification on Thailand, contact:


peter@goglobalcompliance.com
Go Global Compliance Inc.

Israel - Required Package Markings

These equipment package markings are required as part of the safety/emc certification requirements for Israel

Name of manufacturer:
Country of manufacture:
Manufacturing year:
Name of the importer:
Address of the importer:


Hebrew


שם היצרן
ארץ יצור
שנת יצור
שם היבואן
כתובת יבואן

Australia: C-Tick and A-Tick Compliance Markings

In this link you can find photo-ready artwork for the C-Tick and A-Tick Compliance Marks


http://www.acma.gov.au/WEB/STANDARD/pc=PC_2796


PETER S. MERGUERIAN
peter@goglobalcompliance.com
GO GLOBAL COMPLIANCE, INC.
Tel: (408) 416-3772
Fax: (408) 416-3224
Cell: (925) 487-4640
Skype: petermerguerian
twitter: marketaccess

Singapore IDA Marking Requirements for Radio Equipment

Argentina Class I (grounded) and Class II (double insulated) Plug Markings

Per Argentinean Resolution 731 issued 1987, Class I and Class II plugs ( both IRAM 2063 and IRAM 2073 plugs) must be marked with the following wordings. This is typically marked with a adhesive type label around the power cord adjacent to the plug.

Class I (grounded plugs)

IMPORTANTE PARA EL USUARIO

Los aparatos de la Clase I, poseen ficha de 3 espigas planas con toma de tierra, para aumentar su seguridad.


NO LA ELIMINE colocando un adaptador o reemplazando la ficha por otra de 2 espigas.

PARA SU SEGURIDAD, su instalación debe estar provista de conductor de tierra. De no ser así, realice la adecuación con personal especializado.



Class II Plug Wording:


IMPORTANTE PARA EL USUARIO

Los aparatos de la Clase II, que se identifican con el símbolo (double insulated square within a square symbol), poseen ficha de 2 espigas planas sin toma de tierra, pues poseen doble aislación o aislación reforzada en todas sus partes.


NO LA ELIMINE colocando un adaptador o reemplazando la ficha por otra de 2 espigas cilíndricas, ya que la misma es compatible con los tomacorrientes con toma de tierra.

PARA SU SEGURIDAD, su instalación debe estar provista de conductor de tierra. De no ser así, realice la adecuación con personal especializado.





English translation of the above

Class I Plugs

IMPORTANT FOR THE USER

Class I equipment, carries plugs with 3 flat pins with earthing contact, to increase their safety.

DO NOT REMOVE IT using an adaptor or replacing it with a plug of 2 pins.

FOR YOUR SAFETY, installation should be provided with an earthing conductor. If not, specialized personnel should be in charge of the adaptation.



Class II Plugs:


IMPORTANT FOR THE USER

Class II equipment, identified with the symbol (double insulated symbol square within a square), carries plugs with 2 flat pins without earthing contact, as they have double insulation or reinforced insulation in each of its parts.

DO NOT REMOVE IT using an adaptor or replacing it with another plug of 2 round pins, as the same one is compatible with earthing contact sockets.

FOR YOUR SAFETY, installation should be provided with an earthing conductor. If not, specialized personnel should be in charge of the adaptation.


PETER S. MERGUERIAN
peter@goglobalcompliance.com
GO GLOBAL COMPLIANCE, INC.
Tel: (408) 416-3772
Fax: (408) 416-3224
Cell: (925) 487-4640
Skype: petermerguerian
twitter: marketaccess