Global Regulatory Compliance
Tuesday, July 24, 2012
Welcome Back Readers
Dear Readers,
From time to time, we temporarily de-activate the blog in order to clear up any unecessary material and ensure links are functional. We are happy to get back on line.
Best Regards,
The Go Global Compliance Team
Sunday, February 19, 2012
USA - UL 2054 Proposed Changes
The following changes in requirements to the Standard for Household and Commercial Batteries, UL 2054, are being proposed for preliminary review and comment only:
1. For Preliminary Review Only: Addition of compliance requirement for 4.1.5 (Construction), 19.3 (250N Steady Force), 20.3 (Mold Stress Relief), and 21.5 (Drop Impact).
2. For Preliminary Review Only: Revision of the discharged current in 10.11.
PROPOSALS
1. For Preliminary Review Only: Addition of compliance requirement for 4.1.5, 19.3, 20.3, and 21.5.
RATIONALE
(1) In 4.1.5, there is no clear definition for the wordings “minimized” and “debris”, and also no clear compliance requirement for openings, it caused much trouble in product design and safety certification.
(2) In order to meet UL 60950-1 Openings in Enclosures requirements outlined in Clause 4.6;
Proposal: Add a compliance requirement for 4.1.5, 19.3, 20.3, and 21.5.
PROPOSAL
4.1.6 To determine compliance with 4.1.5, use a straight metal rod that is 1 mm (0.04 inch) in diameter and 13-mm (0.5-in) long. The rod shall not contact bare conductive parts when applied to openings in the enclosure. The rod is applied without appreciable force, in every possible position.
Exception No. 1: A battery pack enclosure with openings that do not exceed 1 mm (0.04 inch) in width,
regardless of length, need not comply.
Exception No. 2: Unrestricted access is permitted to limited power source circuit.
2. For Preliminary Review Only: Revision of the discharged current in 10.11.
RATIONALE
The discharged current was not consistent in Abnormal Charging Test in 6.3 and 10.11.
(1) Requirements in same Standard shall be consistent.
(2) In order to avoid sample damage prior to testing, all sample preparation shall follow the manufacturer specified condition.
Revise the discharged current in 10.11, see the following proposal for detail.
PROPOSAL
10.11 The batteries are to be tested in an ambient temperature of 20 5°C (68 9°F). A thermocouple is to be attached to the cells of each test sample battery. Each battery shall be discharged at a constant current of 0.2C/1 hour, to a manufacturer specified discharge endpoint voltage to the manufacturer specified end point voltage using the manufacturer specified current.
1. For Preliminary Review Only: Addition of compliance requirement for 4.1.5 (Construction), 19.3 (250N Steady Force), 20.3 (Mold Stress Relief), and 21.5 (Drop Impact).
2. For Preliminary Review Only: Revision of the discharged current in 10.11.
PROPOSALS
1. For Preliminary Review Only: Addition of compliance requirement for 4.1.5, 19.3, 20.3, and 21.5.
RATIONALE
(1) In 4.1.5, there is no clear definition for the wordings “minimized” and “debris”, and also no clear compliance requirement for openings, it caused much trouble in product design and safety certification.
(2) In order to meet UL 60950-1 Openings in Enclosures requirements outlined in Clause 4.6;
Proposal: Add a compliance requirement for 4.1.5, 19.3, 20.3, and 21.5.
PROPOSAL
4.1.6 To determine compliance with 4.1.5, use a straight metal rod that is 1 mm (0.04 inch) in diameter and 13-mm (0.5-in) long. The rod shall not contact bare conductive parts when applied to openings in the enclosure. The rod is applied without appreciable force, in every possible position.
Exception No. 1: A battery pack enclosure with openings that do not exceed 1 mm (0.04 inch) in width,
regardless of length, need not comply.
Exception No. 2: Unrestricted access is permitted to limited power source circuit.
2. For Preliminary Review Only: Revision of the discharged current in 10.11.
RATIONALE
The discharged current was not consistent in Abnormal Charging Test in 6.3 and 10.11.
(1) Requirements in same Standard shall be consistent.
(2) In order to avoid sample damage prior to testing, all sample preparation shall follow the manufacturer specified condition.
Revise the discharged current in 10.11, see the following proposal for detail.
PROPOSAL
10.11 The batteries are to be tested in an ambient temperature of 20 5°C (68 9°F). A thermocouple is to be attached to the cells of each test sample battery. Each battery shall be discharged at a constant current of 0.2C/1 hour, to a manufacturer specified discharge endpoint voltage to the manufacturer specified end point voltage using the manufacturer specified current.
Saturday, January 21, 2012
USA - EPA; Chemical Data Reporting
http://www.epa.gov/oppt/iur
The purpose of this program is to collect quality screening-level, exposure-related information on chemical substances and to make that information available for use by EPA and, to the extent possible, due to data confidentiality claims, to the public.
Contact:
PETER MERGUERIAN
peter@goglobalcompliance.com
www.goglobalcompliance.com
The purpose of this program is to collect quality screening-level, exposure-related information on chemical substances and to make that information available for use by EPA and, to the extent possible, due to data confidentiality claims, to the public.
Contact:
PETER MERGUERIAN
peter@goglobalcompliance.com
www.goglobalcompliance.com
Thursday, January 19, 2012
Sunday, January 8, 2012
Israel - Standby Power Regulations Effective January 1, 2012
Standy Power regulations "Energy Sources (Maximum Electric Power in Standby Mode for Home and Office Appliances), 5771 - 2011 Regulations
Product Scope includes:
Household appliances with electronic displays: washing machine, dryer, dishwashers, ovens, microwaves;
Information technology equipment: computers, computer monitors and printers;
Audio equipment: radios, amplifiers and wireless telephones;
Television receivers, digital decoders to receive cable and satellite broadcasts (excluding digital decoders operated by broadcast centers or coded broadcasting)
Standard Used to Evaluate Compliance:
Israeli Standard IS 62301 "Household electrical appliances: measurement of standby power"
Test Laboratories:
Standards Institution of Israel or an approved laboratory within the meaning of Section 12 of the Standards Law
Effective Date:
January 1, 2012
Maximum Electric Power of Appliances In Standby Mode:
Appliances in standby mode which are then fully operative using a remote control or similar means: Maximum 1 Watt
Appliances with electronic displays to display information pertaining to operation mode of the appliance including but not limited to clocks: Maximum 2 Watts
For additional information or obtaining the required approvals, contact:
GO GLOBAL COMPLIANCE, INC.
PETER MERGUERIAN
peter@goglobalcompliance.com
www.goglobalcompliance.com
(408) 416-3772
Product Scope includes:
Household appliances with electronic displays: washing machine, dryer, dishwashers, ovens, microwaves;
Information technology equipment: computers, computer monitors and printers;
Audio equipment: radios, amplifiers and wireless telephones;
Television receivers, digital decoders to receive cable and satellite broadcasts (excluding digital decoders operated by broadcast centers or coded broadcasting)
Standard Used to Evaluate Compliance:
Israeli Standard IS 62301 "Household electrical appliances: measurement of standby power"
Test Laboratories:
Standards Institution of Israel or an approved laboratory within the meaning of Section 12 of the Standards Law
Effective Date:
January 1, 2012
Maximum Electric Power of Appliances In Standby Mode:
Appliances in standby mode which are then fully operative using a remote control or similar means: Maximum 1 Watt
Appliances with electronic displays to display information pertaining to operation mode of the appliance including but not limited to clocks: Maximum 2 Watts
For additional information or obtaining the required approvals, contact:
GO GLOBAL COMPLIANCE, INC.
PETER MERGUERIAN
peter@goglobalcompliance.com
www.goglobalcompliance.com
(408) 416-3772
Thursday, January 5, 2012
Job Offer: Wireless Regulatory Test Expert – San Diego
Seeking an expert in wireless regulatory testing. BSEE preferred although Associate's Degree is acceptable. Must have extensive experience in taking products through regulatory testing in a wireless environment. This person must have either experience in the cellular space or the WiFi space (candidates with both will be given first preference). Ideally has contacts at the FCC and experience in technical discussions with Lab personnel. Responsible for achieving FCC approval as well as CE approval for all new products (about 4 to 6 a year). Ideal candidate will have RF Bench Test skills.
Contact:
Jill Martinelli
Director of Technical Recruitment
TriStaff Technical Search
ph: 858-597-0845
mobile: 858-220-1282
Contact:
Jill Martinelli
Director of Technical Recruitment
TriStaff Technical Search
ph: 858-597-0845
mobile: 858-220-1282
Brazil - Inmetro Standard Update for Household Appliances
In accordance to "Portaria INMETRO n⁰ 371/2009", parag. 2.1.1, starting January 1st, 2012 test reports based on Standard ABNT NBR NM 60335-1:2010 or IEC 60335-1:2006 (4th Edition of the Standard), as well as other particular Standards must be considered together with any partcular Part 2 Standards as specified in the Portaria.
"2.1.1 A critério do fabricante/importador, até 31/12/2011, este RAC considera a possibilidade de utilizar como base normativa a norma ABNT NBR NM 60335-1/ 2006 (e NM 60335-1/2006) – Segurança de Aparelhos Eletrodomésticos e Similares, Parte-1: Requisitos Gerais. Após este prazo apenas a versão 4 da IEC 60335-1:2006 ou da ABNT NBR (ou NM) equivalente e suas particulares correspondentes serão aceitas. Considera-se que a utilização das normas de requisitos particulares seja feita apenas nas versões compatíveis com a parte geral (60335-1) até o momento em que somente a versão 4 seja aceita."
For all your Brazil needs whether Inmetro or Anatel certifications, please contact:
PETER S. MERGUERIAN
peter@goglobalcompliance.com
GO GLOBAL COMPLIANCE INC.
www.goglobalcompliance.com
Office:(408) 416-3772
Cel: (408) 931-3303
"2.1.1 A critério do fabricante/importador, até 31/12/2011, este RAC considera a possibilidade de utilizar como base normativa a norma ABNT NBR NM 60335-1/ 2006 (e NM 60335-1/2006) – Segurança de Aparelhos Eletrodomésticos e Similares, Parte-1: Requisitos Gerais. Após este prazo apenas a versão 4 da IEC 60335-1:2006 ou da ABNT NBR (ou NM) equivalente e suas particulares correspondentes serão aceitas. Considera-se que a utilização das normas de requisitos particulares seja feita apenas nas versões compatíveis com a parte geral (60335-1) até o momento em que somente a versão 4 seja aceita."
For all your Brazil needs whether Inmetro or Anatel certifications, please contact:
PETER S. MERGUERIAN
peter@goglobalcompliance.com
GO GLOBAL COMPLIANCE INC.
www.goglobalcompliance.com
Office:(408) 416-3772
Cel: (408) 931-3303
Wednesday, December 28, 2011
United Arab Emirates (UAE): Regulated Products
Products Regulated in the UAE include:
1. Electrical storage water heaters.
2. Room air-conditioners.
i. Window type
ii. Split-type
3. Washing machines and clothes dryers.
iii. Fully automatic
iv. Semi automatic
4. Microwave oven.
5. Electric iron.
v. Dry
vi. Steam
6. Refrigerators, freezers and chillers.
vii. Refrigerator
viii. Freezer
ix. Chillers
x. Refrigerator/Freezer combination
7. Power extension cords.
8. Electric ovens/stove.
9. Cooking Appliances.
i. Warming plates and similar appliances
ii. Deep Fat Fryers
iii. Frying Pans and similar appliances
iv. Outdoor Barbecues
10. Electromechanical Kitchen Appliances.
i. Blenders
ii. Food Processors
iii. Grinders and mills
iv. Mixers
v. Can openers
vi. Centrifugal and juice extractors/squeezers
vii. Dough kneaders
viii. Egg beaters and cream whippers
ix. Graters and shredders
x. Mincers
xi. Kitchen waste disposers
xii. Knife sharpeners and cleaners
xiii. Milk shakers, ice-cream and sorbet mixers
xiv. Potato peelers/chippers/cutters
xv. Slicing machines
11. Vacuum Cleaners.
12. Fans & Fan Systems including Air Purifiers.
i. Table fans
ii. Pedestal fans
iii. Wall fans
iv. Ceiling or Roof fans
v. Window fans
vi. Domestic cooker range hoods
vii. Air cleaning appliances (air-purifiers)
13. Appliances for Heating Liquids.
i. Kitchen water heaters
ii. Egg boilers
iii. Steam cookers
14. Grass Shears/Trimmers.
i. Lawn trimmers
ii. Lawn edge trimmers
iii. Scissor type grass shears
15. LPG fired Cookers, Accessories and Similar Appliances.
i. Domestic cookers for use with liquefied petroleum gas (LPG)
ii. Hand-wheel and self-closing valves for cylinders filled with liquefied petroleum fases for domestic use, with a water capacity not exceeding 52.5 liters
iii. Low pressure regulators of discharge capacity not less than 2000g LPG per hour for valves of LPG cylinders for household appliances of nominal pressure of 3kPa
iv. Class A: Normal threaded-in type
v. Class B: Quick coupling service connection for corresponding valves.
16. Cigarettes.
17. OXO-Biodegradable Plastic Bag.
18. Retreaded Tires.
19. Tobacco Moasal.
20. Toys
1. Electrical storage water heaters.
2. Room air-conditioners.
i. Window type
ii. Split-type
3. Washing machines and clothes dryers.
iii. Fully automatic
iv. Semi automatic
4. Microwave oven.
5. Electric iron.
v. Dry
vi. Steam
6. Refrigerators, freezers and chillers.
vii. Refrigerator
viii. Freezer
ix. Chillers
x. Refrigerator/Freezer combination
7. Power extension cords.
8. Electric ovens/stove.
9. Cooking Appliances.
i. Warming plates and similar appliances
ii. Deep Fat Fryers
iii. Frying Pans and similar appliances
iv. Outdoor Barbecues
10. Electromechanical Kitchen Appliances.
i. Blenders
ii. Food Processors
iii. Grinders and mills
iv. Mixers
v. Can openers
vi. Centrifugal and juice extractors/squeezers
vii. Dough kneaders
viii. Egg beaters and cream whippers
ix. Graters and shredders
x. Mincers
xi. Kitchen waste disposers
xii. Knife sharpeners and cleaners
xiii. Milk shakers, ice-cream and sorbet mixers
xiv. Potato peelers/chippers/cutters
xv. Slicing machines
11. Vacuum Cleaners.
12. Fans & Fan Systems including Air Purifiers.
i. Table fans
ii. Pedestal fans
iii. Wall fans
iv. Ceiling or Roof fans
v. Window fans
vi. Domestic cooker range hoods
vii. Air cleaning appliances (air-purifiers)
13. Appliances for Heating Liquids.
i. Kitchen water heaters
ii. Egg boilers
iii. Steam cookers
14. Grass Shears/Trimmers.
i. Lawn trimmers
ii. Lawn edge trimmers
iii. Scissor type grass shears
15. LPG fired Cookers, Accessories and Similar Appliances.
i. Domestic cookers for use with liquefied petroleum gas (LPG)
ii. Hand-wheel and self-closing valves for cylinders filled with liquefied petroleum fases for domestic use, with a water capacity not exceeding 52.5 liters
iii. Low pressure regulators of discharge capacity not less than 2000g LPG per hour for valves of LPG cylinders for household appliances of nominal pressure of 3kPa
iv. Class A: Normal threaded-in type
v. Class B: Quick coupling service connection for corresponding valves.
16. Cigarettes.
17. OXO-Biodegradable Plastic Bag.
18. Retreaded Tires.
19. Tobacco Moasal.
20. Toys
Thursday, December 1, 2011
Saturday, November 19, 2011
Subscribe to:
Posts (Atom)